A1 Bracket

A1 Bracket to suit Half Round Gutter

Facia bracket (rafter), suitable for gutters up to and including 200mm.

Fixture: To steel purlins with Wafer 10-16-16 or gutter bolts & nuts. Use Wafer Type 17 10-35 screws for timber.
The diagram below shows the minimum fixing area (B) required for installation of the A1 bracket. Any section above the specified fixing area can be folded back over the purlin or timber.

Each bracket is required to be fixed by a minimum of 4 fixing points marked in the diagram below. Be sure that the 4 lower points are fixed.

Click on diagram below to ENLARGE.
A1 Bracket to suit Half Round Gutter up to 200mm diameter
Half Round Gutter A1 Bracket:
Standard sizes available in COLORBOND, COLORBOND Ultra, COLORBOND Metallic and Galvanised. (COLORBOND range available as powder coated Galvanised or Aluminium brackets) Stainless Steel only available in 150mm. Also available in Copper in sizes up to 200mm.
Diameter
A (mm)
B (mm)
C (mm)
WEIGHT (g)
100mm
105
60
80
106
125mm
127
75
80
125
150mm
153
65
80
145
200mm
192
100
100
267
Fixing A1 bracket


Model Manufacturer- Item Name Product Image Price

Copper A1 Bracket to suit Half Round Gutter

Copper A1 Bracket to suit Half Round Gutter 100mm , 125mm, 150mm & 200mm.
Copper A1 Bracket to suit Half Round Gutter

Contact Us

Powdercoated COLORBOND A1 Bracket to suit Half Round Gutter

Powdercoated Gal brackets to suit Colorbond colours in following sizes 100mm , 125mm, 150mm & 200mm.
Powdercoated COLORBOND A1 Bracket to suit Half Round Gutter

Contact Us

HRG##BA1SS

Stainless Steel A1 Bracket Half Round Gutter

A1 Bracket available in Gal, Copper and Powdercoated Gal to suit Colorbond colours and Stainless Steel 304 in 150mm.
Stainless Steel A1 Bracket Half Round Gutter

Contact Us


Your IP Address is: 18.232.186.117
Copyright © 2020 KFC Roofing Supplies